Wallace Perimeter Security ALPHA, Руководство по установке и обслуживанию

Страница: 104 / 182

104
wallaceperimetersecurity.com
Phone: 866.300.1110
REINSTATING FACTORY DEFAULTS
Reinstating Factory Defaults
Thirteen menu configurations are available in the User Menu. Several other items in the Installer Menu
let you customize the operator depending on the number of attached accessories and your customer’s
needs.
To reinstate factory defaults, take the following
steps:
1. At a gate status display, press the MENU
button twice. This accesses the User
Menu and the CLOSE TIMER display
appears.
2. Simultaneously, press the OPEN and
RESET buttons to enter the Installer Menu.
Release the buttons and the LEARN LIMITS
display appears.
3. Press NEXT until the FACTORY DEFAULTS
display appears. The factory default
setting is 0.
4. Use the SELECT and NEXT buttons to
navigate and change the number on the
display to 1.
When you press SELECT to accept FD
1, the factory settings are reinstated
immediately and the menu display
returns to the initial Setup Menu. The
gate operator will not run until the
three menu parameters are entered:
Usage Class , Gate Handing , and Gate
Weight . The limits will also need to
be relearned. Refer to “Programming
the Initial Setup Menu” on page 61
and “Establishing the OPEN and CLOSE
Limits” on page 63 .
Reinstating factory default clears ALL
menu settings stored in the operator
and returns them to factory defaults.
It is recommended that you save
the menu settings before reinstating
factory defaults. You can write the
settings in a notebook or, if you
have a laptop computer, you can use
HySecurity’s S.T.A.R.T. software and
download the menu settings and
save them to a file to upload to the
operator at a later date.
1. Start at a gate
status display.
2. To access the User
Menu, press MENU
twice .
3. To access the
Installer Menu,
simultaneously press
OPEN and RESET.
4. Use NEXT to
navigate to the menu
display. Change the
setting using the
SELECT and NEXT
buttons.