Wallace Perimeter Security ALPHA, Руководство по установке и обслуживанию

Страница: 23 / 182

Alpha/Delta (Kinetic Operator) Installation and Maintenance Manual Revision 1 - MAY 2023
23
SAFETY STANDARDS - OWNER/USER RESPONSIBILITY
Safety Standards - Owner/User Responsibility
A moving gate can cause serious
injury or death. Automatic gate
operators move gates with high
force. Make sure gates and gate
operators are installed to reduce
the risks of entrapment. Verify your
gate and gate operator comply with
UL 325 Safety Standards and ASTM
F2200 Gate and Fence Standards.
Ask for a copy of the gate operator's
product literature and review it.
You are responsible for educating
all gate system users about proper
use of the automated gate system.
• Automatic gates are for vehicular use only;
provide and maintain walkways and signs
to direct pedestrians to a separate walk-
through entrance.
• An automatic gate can start at any time
without warning; always keep people away
from the gate area.
• Never let children operate or play with
gate controls. Keep all remote controls,
especially radio transmitters, away from
children. Do not allow children to play on
or around the gate or gate operators.
• Learn how to turn the power on and off.
Learn how to manually release the gate.
Before attempting a manual release,
make sure the gate is not moving.
• WARNING signs supplied with the gate operator
must remain installed and clearly visible on
both sides of the gate. The signs are required
to maintain UL 325 compliance.
• Do not physically disable the warning buzzer
and NEVER disconnect or cut its wires. The
buzzer is required to function in the event of
entrapment, regardless of UL 325 gate usage
class. It provides an alert that the gate is
about to move. Disabling the warning buzzer
may increase the risk or extent of injury if
entrapment occurs.
• Test the gate operator monthly. Specifically,
test the Inherent Entrapment Sensor (IES) and
external entrapment protection sensors. The
gate must reverse its direction of travel upon
contact with a rigid object and/or stop when an
object activates the non-contact sensors. After
adjusting the force or the limit of travel, retest
the gate operator. Failure to adjust and test
the gate operator on a regularly maintained
schedule can increase the risk of injury or
death.
• Have a professional gate installer routinely
test the entire gate operator and entrapment
protection sensors. Have a qualified service
person make repairs to gate hardware to keep
the gate running smoothly.