Vicon RO-C 1400 страница 120 Скачать руководство пользователя

Страница: 120 / 157

Storing the machine

120

Disconnecting the

machine

Disconnect safely

You may only disconnect the machine when:

•

all parts are in a safe condition,

•

your immediate surroundings are safe,

•

the hopper is empty.

Work carefully:

•

check the environment (children!) and ensure that nobody is in the

vicinity of the tractor or the machine.

•

wear safety gloves and shoes,

•

the machine or parking support must only be placed on a straight,

firm surface,

•

never stand between the tractor and machine while the power lift is

operated externally while disconnecting the machine. Using the

power lift entails the risk of accidents by crushing or jack-knifing,

•

operate the power lift slowly and carefully,

•

the power lift during disconnection must be placed in such a

position that accidental release or lowering would be eliminated,

•

sufficient distance must be maintained between parts (e.g. parking

support) that rest on the ground.

Working unsafely could cause serious injuries.

Proceed as follows to store the machine in stable condition for a

shorter or longer period.



switch off the pto shaft;



Take the pressure off the hydraulic system.



Switch the tractor off and remove the keys from the ignition.



Engage the parking brake of the tractor.



Adjust the length of the top link in such a way that it is no longer

live.



Release the top link by undoing the release rope from the catch

hooks and pulling the top link up.



Release the lower links by undoing the release ropes from the

catch hooks and lowering the power lift as far as possible.

Содержание RO-C 1400






























































































































































Результаты поиска

Содержание RO-C 1400

Отзывы:

Похожие инструкции для RO-C 1400

Бренды по названию

Популярные бренды

Vicon RO-C 1400, Руководство пользователя

Результаты поиска

Содержание RO-C 1400

Отзывы:

Похожие инструкции для RO-C 1400

Бренды по названию

Популярные бренды