Vicon RO-C 1400 страница 115 Скачать руководство пользователя

Страница: 115 / 157

Use in the field

115

NDICATION

Most types of fertiliser attract water and can thereby form large

chunks. These chunks can block the spreader or distort the spreading

pattern.

•

When working under moist conditions, use a hopper cover that

closes well.

•

Do not spread without a hopper cover under moist conditions.

•

Never leave the fertiliser for a long period of time in the spreader.

Chunks can also be formed through moisture in the air.

•

Always clean the spreader well after use, including the dosing

openings and the discharge bushings.

Working method

Handle with care

Cautiously approach the machine and handle with care. There could

be hot or live parts! Contact with these materials could cause physical

injury.

To find the cause of the failure or stoppage and solve it as far as

possible, proceed as follows.



Disconnect the PTO shaft immediately!



Switch the tractor off, remove the key from the ignition and engage

the handbrake of the tractor.

NDICATION

Do not place the machine on the ground. Placing a filled machine on

the ground damages the structure!

Содержание RO-C 1400






























































































































































Результаты поиска

Содержание RO-C 1400

Отзывы:

Похожие инструкции для RO-C 1400

Бренды по названию

Популярные бренды

Vicon RO-C 1400, Руководство пользователя

Результаты поиска

Содержание RO-C 1400

Отзывы:

Похожие инструкции для RO-C 1400

Бренды по названию

Популярные бренды