To be done before spreading
82
Material required
•
measuring tape or ruler,
•
spirit level to set the troughs horizontal,
•
7 troughs,
•
7 graduated tubes,
•
1 funnel,
•
notebook, pen and calculator,
•
this manual.
General instructions
Check the position of the dosing setting and the discharge point.
Check the height
(75 cm above the troughs)
and the position
(angle) of the spreader.
Check the rpm of the PTO shaft and the spreader discs.
Always place the buckets
horizontally
on the floor.
Place the buckets at a maximum distance of 4 meters. Make sure
you have additional buckets for testing working width of more than
24 meters.
Do not use the spreader while it is raining or with high humidity.
This will cause the fertiliser to cling to the troughs, which would not
provide the desired results.
Do not spread with wind speeds of more than 3 m/s (wind force of
2).
Содержание RO-C 1400
Страница 4: ...Table of contents 4...
Страница 139: ...Maintenance 139 109 mm Rope Discharge bushing Position V Mechanical...
Страница 153: ...Notes 153 Notes...
