Vicon RO-C 1400 страница 21 Скачать руководство пользователя

Страница: 21 / 157

Safety

Use

Only use after training

The machine may not be operated before the user has been properly

instructed by the dealer or an authorised representative of the

manufacturer.

Ensure that you are familiar with all systems and control machines and

their functions prior to working with them! It will be too late for that once

you are working! Careless usage could lead to injury and damage to

the machine.

To be used and operated by 1 person

The machine may only be operated by one person, from the tractor.

Operating the machine from the tractor will keep you out of harm's

way.

Other people should not be in the direct vicinity of the machine and the

tractor. Those who are within the working area and the danger zone

could be injured.

Check the direct surroundings

Check the immediate environment and keep a constant eye on it at the

start, as well as while you are working with the machine. Familiarise

yourself with the immediate vicinity. Do not start working until all

people and obstacles within the working area and danger zone of the

tractor and machine have been removed.

Never stay or allow anyone to stay within the danger area while the

machine is running! If there are people within the working area and the

danger zone it could lead to injury.

Do not stand on the machine

Being on the machine during activities and transport is prohibited. You

may only be on the parts of the machine intended for the purpose if it

is standing still and prevented from rolling. Being on the machine while

in any other state could lead to serious injury.

Keep the protection intact

The protection of the machine, e.g. shields and guards, protects from

penetrating into danger areas! Therefore all protection must be kept in

optimal condition and moved into the right position prior to starting to

work!

The absence of protective gear could lead to injury.

Содержание RO-C 1400






























































































































































Результаты поиска

Содержание RO-C 1400

Отзывы:

Похожие инструкции для RO-C 1400

Бренды по названию

Популярные бренды

Vicon RO-C 1400, Руководство пользователя

Результаты поиска

Содержание RO-C 1400

Отзывы:

Похожие инструкции для RO-C 1400

Бренды по названию

Популярные бренды