Vicon RO-C 1400 Скачать руководство пользователя страница 39

Страница: 39 / 157

Before first use

Calibration container

The calibration container is used to control the dosing setting of the

machine.

The calibration container must be mounted on the left spreading disc

for the calibration test.



Remove the vanes.



Turn the nuts on the bolts on which the gearbox is mounted to the

turning rod back 5 mm.



Push the bolts back as far as possible.



Hook the support behind the heads of the bolts.



Adjust the height of the support. The top end of the support must

be on the same height as the top end of the turning rod.



Fasten the nuts on the bolts again.

Note

Mount the support carefully so that the position of the gearbox would

not be changed!



Place the calibration container.



Fix the locks between the two halves.



Turn the other spreading disc by hand and listen if the spreading

disc in the calibration container is making contact with the

container.



Turn the lock nut upwards.



Turn the settings knob upwards or downwards until you can hear

that the spreading disc is no longer touching the calibration

container.



Turn the lock nut again.

Calibration container

Closing

support for the calibration container

driving rod

Lock nut

Settings knob

Содержание RO-C 1400






























































































































































Результаты поиска

Содержание RO-C 1400

Отзывы:

Vicon RO-C 1400, Руководство пользователя, Страница: 39 / 157

Результаты поиска

Содержание RO-C 1400

Отзывы: