Vicon RO-C 1400 Скачать руководство пользователя страница 23

Страница: 23 / 157

Safety

PTO shaft rotates after disengaging

After switching off the PTO shaft, the machine will continue running

because of inertia. Keep a safe distance to the machine until the

moving parts have come to a complete stop. Approaching the

machine while it is rotating can cause serious or deadly injuries.

Maintenance

Always keep to the prescribed maintenance intervals

Take the machine for inspection and maintenance at the intervals as

prescribed in this manual. All of the manufacturer's responsibility and

the guarantee will become null and void if the prescribed intervals are

not adhered to.

Performed by an authorised person

Always have an authorised expert perform maintenance and repairs

as prescribed in, as prescribed in

→

paragraph »Authorisation« on page 12.

Maintenance performed in an inexpert manner could lead to unsafe

work situations or damage to the machine or crops.

Never use the tractor in a closed area

The tractor must never be used in a closed area. Exhaust fumes

collect without being noticed. Exhaust fumes can cause serious or

deadly injuries.

Protect the machine

Fertiliser and other salts have a great influence on the rate of

corrosion. Empty the hopper at the end of activities. Protect the

machine by always cleaning it after using such material and patch

breaks in the paint. Corrosion affects the strength of the construction

and the operation of the machine, which could lead to a shortened

lifespan.

Only use original parts when replacing

Using other non-genuine parts could lead to problems and unsafe

situations when using the machine.

You can use the supplied parts manual (either as a printout or as a

PDF in the included memory card) to locate the correct part number.

Never work on the machine while it is running

Never work on the machine while it is running. A running machine has

several moving parts which can not be seen. These can cause serious

injuries.

Содержание RO-C 1400






























































































































































Результаты поиска

Содержание RO-C 1400

Отзывы:

Vicon RO-C 1400, Руководство пользователя, Страница: 23 / 157

Результаты поиска

Содержание RO-C 1400

Отзывы: