Before first use
43
Put the machine on a supporting beam before moving in between
the tractor and machine
This will ensure that the machine cannot drop if the power lift should
inadvertently be operated while you are between the tractor and
machine. Switch the tractor motor off. Without the support, a power lift
that drops could wedge you in, resulting in possible serious physical
injury.
The maximum operating angle of the coupling shaft is 30
°
when lifted
and 30
°
when lowered.This is the maximum length between the PTO
shaft and the machine drive axle.
Place the machine on a supporting beam wit the power lift in the
highest position.
Switch the tractor off and remove the keys from the ignition.
Engage the parking brake of the tractor.
Check if the furthest working angle is less than 30
°
.
Check that the overlap of the profiled tubes is still at least 150 mm.
Remove the tractor section.
Apply grease to the profiled tubes.
Attach the protection sleeves.
Slide the coupling shaft halves into each other.
Mount the coupling shaft to the machine.
max.30
o
max.30
o
max.30
o
max.30
o
Содержание RO-C 1400
Страница 4: ...Table of contents 4...
Страница 139: ...Maintenance 139 109 mm Rope Discharge bushing Position V Mechanical...
Страница 153: ...Notes 153 Notes...
