Vicon RO-C 1400 страница 50 Скачать руководство пользователя

Страница: 50 / 157

Connecting to the tractor

electric plugs

Connect electric plugs safely

Connect the electric plugs and cables only after the machine has been

attached. Place the electric plugs and cables in such a way that they

would not get pinched or damaged.

Only use the electric stream as intended. Do not use the cigarette

lighter.



Check the plugs and the connections on the tractor for dirt. Clean

if necessary.



Connect the electric plugs.



Place the cables so that they would not get pinched during working

activities.

Connecting the

power lift

Check the decoupling ropes of the quick coupling

The decoupling ropes must never be tense and must provide sufficient

freedom for movement, even with the power lift in the lowest position

as it could otherwise accidentally disconnect the quick coupling.

Accidental disconnection could cause damage to the machine and

may lead to personal injury.



Start the tractor again.



Reverse carefully so that the catch hooks of the lower links are

exactly under the ball bearings.



Open the quick coupling of the catch hooks with the release ropes.



Engage the power lift until the ball bearings are correctly located in

the catch hooks and close the quick coupling.



Check if the catch hooks have locked correctly by lowering the

power lift carefully.



Turn the top link to the appropriate length and secure if possible.



Open the quick coupling of the catch hook with the release rope.



Let the catch hook fall over the ball bearing at the top and close the

quick coupling.



Check if the catch hook is correctly secured by pushing and pulling

it.

Содержание RO-C 1400






























































































































































Результаты поиска

Содержание RO-C 1400

Отзывы:

Похожие инструкции для RO-C 1400

Бренды по названию

Популярные бренды

Vicon RO-C 1400, Руководство пользователя

Результаты поиска

Содержание RO-C 1400

Отзывы:

Похожие инструкции для RO-C 1400

Бренды по названию

Популярные бренды