NOTE: Oblong hole should be at top.
r ATV Spreader
Instructions fo
MOUNTING BRACKET TO ATV RACK
CONNECTING THE SPREADER
ATTACHING SUPPORT STRAP
U-Bolt
ATV Rack
Mounting
Bracket
Hitch Pins
Spreader Frame
Align holes
Cotter Pins
THANK YOU
for your purchase of the
ATV Spreader,
a top
quality Moultrie product. Please read both sides of this sheet
before operating this unit. if you should have any questions
about this or any other Moultrie product, please contact us using
the information on the revere side.
To help us better serve you, please complete and mail the
enclosed Warranty Card.
Using provided
Nuts, Washers and
U-Bolts
, connect the
Mounting Bracket
to
the rack of the ATV as shown.
When sliding
Feedgate Arm
through
oblong hole, align the holes on the
Mounting Bracket
with the holes on
the frame of the
Spreader.
Slide the
two
Hitch Pins
through both of the
holes and secure with
Cotter Pins
as shown.
Slide a 6’x 1”
Ratcheting
Tie-Down Strap
through
Metal Loop
on back of ATV
frame. Place S hooks of ratchet
strap around front of ATV rack.
Adjust tension strap until firm.
Metal Loop
Ratcheting Tension
Adjustment
Tie-Down
Strap
Strap S hooks