Vicon RO-C 1400 страница 86 Скачать руководство пользователя

Страница: 86 / 157

To be done before spreading



Only stop spreading after you have driven at least one working

width over the troughs (e.g. 18 or 21 meters). This is because the

spreader distributes roughly even to the back, front and to the side.



Drive back in the next track, over trough 7. Maintain the same

distance with opening and closing the dosing units. Keep to the

same driving speed and PTO shaft rpm!

If you set an application rate of less than 250 kg/ha, drive to and from

over the same tracks in order to collect sufficient fertiliser in the

troughs for a good comparison. Maintain the same distance with

opening and closing the dosing units. Keep to the same driving speed

and PTO shaft rpm!

Review and adaptation

The content of the separate tubes can differ 15% at most from the

average:

NDICATION

If the correction seems to be 2 characters too strong after repeating

the test, set the discharge point back by one character.

Good spreading pattern, the spreader has been adjusted

well.

The spreader is not spreading wide enough.



Adjust the discharge opening 2 letters towards F



Repeat the test

The spreader is spreading too wide.



Adjust the discharge opening 2 letters towards Z



Repeat the test

The spreader is not spreading wide enough (trapezium

spreading pattern):



Adjust the discharge opening 2 letters towards F



Repeat the test

The spreader is spreading too wide (trapezium spreading

pattern):



Adjust the discharge opening 2 letters towards Z



Repeat the test

Содержание RO-C 1400






























































































































































Результаты поиска

Содержание RO-C 1400

Отзывы:

Похожие инструкции для RO-C 1400

Бренды по названию

Популярные бренды

Vicon RO-C 1400, Руководство пользователя

Результаты поиска

Содержание RO-C 1400

Отзывы:

Похожие инструкции для RO-C 1400

Бренды по названию

Популярные бренды