User's Manual
REX-FDCF
Apl.2011 Rev.1.0
Thank you for purchasing FDD emulated CF Card Reader(REX-FDCF).
Please read through these operating manual so you will know to setup REX-FDCF.
1.
Introduction
2.
Mounting instruction
-Connect FDD interface cable(3) and FDD power cable(1) to REX-FDCF. (*Refer to section 4-1)
-REX-FDCF is recognized as PC/AT Std.FDD drive automatically. You do not need to install driver software.
-CF Media compliant with Compact Flash Specification Revision4.1
-TypeI or TypeII CF media.
-Media capacity over 4MBytes.
(Media capacity recognized from OS is same size as selected FDD format style)
3-1. Supported CF Media
3-2. General Specification
3.
Specifications
Supply voltage
Output voltage
Operation temperature
Operation humidity
Storage temperature
Storage humidity
Consumption current
Weight
+5V +/-10%
+3.3V +/-5%
0 deg - 55deg
20% - 80%
0 deg - 65deg
20% - 80%
119mA idle state/169mA
262g
provided from FDD power connector.
provide to CF media from CF connector pin.
non
-
condensing
non
-
condensing
non
-
condensing
non
-
condensing
operation state(supply current to CF included)
include chassis weight
4.
Part Names
4-2. Front part
4-1. Rear part
H
W
D
CompactFlash
REX-FDCF
Read/Write
Read Only
1
2
3
4
5
6
7
8
9
10
①
②
③
④
⑤
⑥ ⑦
If the write-protect SW is turned to the "Read Only",
it returns the state "write-protect floppy media is inserted" to the host PC.
Power connector
Setting DIP-SW (Refer to section 4-4)
CF media slot
CF media eject button
CF media write-protect SW
CF media access LED
Part Names
①
②
③
④
⑤
⑥
⑦
FDD Interface connector (Refer to section 4-5)
Outline dimension
Width
Depth
Height
4.00in(101.50mm)
4.43in( 112.50mm)
0.99in( 25.30mm)
- 1 -
