Vicon RO-C 1400 страница 93 Скачать руководство пользователя

Страница: 93 / 157

To be done before spreading



Start the tractor, engage the PTO shaft and set it to 400 rpm. Select

a gear that would ensure that you drive at the same speed as with

the normal PTO shaft, or reduce the application rate proportionally

with the driving speed.



Drive along the tracks and open the dosing unit a few metres

before you drive over the first bucket in the middle.



Only stop spreading after you have driven at least one working

width over the troughs (e.g. 18 or 21 meters). This is because the

spreader distributes roughly even to the back, front and to the side.



If you set an application rate of less than 250 kg/ha, drive over the

same tracks in order to collect sufficient fertiliser in the troughs for

a good comparison.

Maintain the same distance with opening and closing the dosing units.

Keep to the same driving speed and PTO shaft rpm!



Empty the troughs with a funnel into the graduated tubes.

Содержание RO-C 1400






























































































































































Результаты поиска

Содержание RO-C 1400

Отзывы:

Похожие инструкции для RO-C 1400

Бренды по названию

Популярные бренды

Vicon RO-C 1400, Руководство пользователя

Результаты поиска

Содержание RO-C 1400

Отзывы:

Похожие инструкции для RO-C 1400

Бренды по названию

Популярные бренды