Vicon RO-C 1400 Скачать руководство пользователя страница 19

Страница: 19 / 157

Safety

Machine

Check the condition of the machine before use

Check the following before using the machine:

•

is the machine in a proper, functioning condition?

•

are all lights, safety and warning provisions correctly mounted and

in good working condition?

•

are the brakes of the machine working properly and have they

been adjusted to the correct position?

Using an unsafe machine could result in personal injury and damage

to the machine.

The machine should only carry, not pull!

It is not permitted to use the machine for pulling as this would have

detrimental consequences to its construction. This could lead to

dangerous situations for bystanders, unsafe operation or damage to

crops.

Do not stand on the machine

Being on the machine during activities and transport is prohibited. You

may only be on the parts of the machine intended for the purpose if it

is standing still and prevented from rolling by means of hand brake

and wheel chocks. Being on the machine while in any other state

could lead to serious injury.

Never work on a running machine

Never work on the machine while it is running. A running machine has

several moving parts which can not be seen. Wait until all parts have

come to a complete halt. Moving parts can cause serious injuries.

Safety decals

Follow the instructions on the stickers

The safety decals on the machine give important advice for a risk free

operation. Respect them to ensure your safety.

Replace any safety decals and safety signs missing or illegible

When parts with a safety decal or safety sign are replaced, check that

the replacement part has the safety decal or safety sign intended.

Stickers that are not legible must be replaced so that they would be

clearly legible at all times.

Содержание RO-C 1400






























































































































































Результаты поиска

Содержание RO-C 1400

Отзывы:

Vicon RO-C 1400, Руководство пользователя, Страница: 19 / 157

Результаты поиска

Содержание RO-C 1400

Отзывы: