Vicon RO-C 1400 страница 130 Скачать руководство пользователя

Страница: 130 / 157

Maintenance

130

Checking the

hydraulic system

Hydraulic oil is under high pressure

Never try to stop a leak with your fingers. Never try to locate a

hydraulic leak or try to contain it by hand! When inspecting always use

appropriate aid (e.g. a piece of wood or sheet metal) and wear safety

goggles, safety gloves and gloves! High pressure fluid easily

penetrates skin and clothes, causing severe injuries. In the event of

injury, contact your physician immediately!

Do not exceed the maximum hydraulic pressure of 200 bars

Prevent the pressure in the

hydraulic system from exceeding 200

bars! Working above the permitted pressure may damage your

machine and result in dangerous situations.

Keep your distance from the hydraulics during inspecting and
test running

Use a stick to bend the hydraulic hoses when checking them for

leakage. That way you will keep at sufficient distance.

Oil jets or hoses that snap back may cause serious physical injury due

to the prevailing pressure and temperature.

Work safely on the hydraulic system

The hydraulic system could be under high pressure. Do not work on

the hydraulic system without:

•

releasing the pressure from the hydraulic system,

•

switching off the electric control system,

•

switching the tractor off,

•

the key must be removed from the ignition,

•

engage the parking brake of the tractor,

•

using the proper tools,

•

wear safety glasses, gloves and shoes.

Working in an unsafe manner on the hydraulic system could lead to

injury and damage to the machine. In the event of injury, contact your

physician immediately! There is also the risk of infection!

Before operating the hydraulic system, check all connections and

hoses for damage and leakage.

Replacement intervals

Regularly inspect the hydraulic system (hoses, pipes, connections).

All hoses, piping and connecting points must be checked regularly, but

at least once a year, by an expert for leakages or visible damage! The

lifetime of a hose should be 6 years maximum (see the production

date on the hoses).

Damaged or old parts must be replaced with new ones that comply

with the technical specifications of the manufacturer of the machine.

Damage to the hydraulic system could lead to injury.

Содержание RO-C 1400






























































































































































Результаты поиска

Содержание RO-C 1400

Отзывы:

Похожие инструкции для RO-C 1400

Бренды по названию

Популярные бренды

Vicon RO-C 1400, Руководство пользователя

Результаты поиска

Содержание RO-C 1400

Отзывы:

Похожие инструкции для RO-C 1400

Бренды по названию

Популярные бренды