80lb Estate Tow
Broadcast Spreader
MODEL # 2050TP
ASSEMBLY INSTRUCTIONS
Earthway_2050TP Manual_ (002)
PAGE 1
SIDE SPREAD CONTROL
The
Side Spread Control
is an innovation that eliminates the need to use a side deflector, which can adversely affect
your application rate, to prevent material from being spread into flowerbeds, on sidewalks, or driveways. The
Side
Spread Control
maintains the correct application rate while it is activated, giving you excellent results in seeding or
spreading while controlling the spread pattern on the left side of the spreader. The
Side Spread Control
is an
EarthWay
®
exclusive.
Thank you for selecting
EarthWay for your
spreader needs. Our
production team in
Northern Indiana takes
pride in building this
spreader. Our customer support team is
standing ready to ensure your success. Please
contact us at www.EarthWay.com to see our
full line of commercial, lawn & garden tools.
Note: Your EarthWay spreader includes a
feature called side spread control. This
feature shuts off the left side of your spreader,
allowing only the right side to continue
spreading evenly. To activate this feature, slide
the lever below the hopper to the right (if
standing behind the spreader) and walk along
a sidewalk or flowerbed that is 12”
-
14” on
your left side. Fertilizer will not spread to the
left. This feature is better than a deflector as
no material is wasted by the deflector.
For spreading, please utilize the following
spreader settings:
OPERATING INSTRUCTIONS
Before filling hopper, become familiar with the operation
of this spreader.
▪
Obtain proper setting for material to be used
from the SETTING MATRIX included with this
spreader.
▪
Move stop bolt on rate gauge assembly to the
proper setting and tighten to secure.
▪
While pulling spreader forward, push control
lever toward the spreader to the stop bolt. To
stop, pull lever forward to close flow holes
before you stop moving.
▪
When finished, empty any remaining material
from hopper.
▪
To prevent corrosion, spray a light oil or Fluid
Film inside the tubing of the chassis and on all
metal parts.
