Assembly and Operation Instructions
Earthway_2050TP Manual_ (002)
PAGE 2
SIDE SPREAD CONTROL OPERATION
The
Side Spread Control
lever is located on the back of the hopper at the bottom. To operate the
Side Spread Control
,
slide the control lever from the left, to the right. This will activate the
Side Spread Control
for a
PARTIAL
spread pattern
and prevent material from being spread to the left side of the spreader. Position the left wheel of your spreader 12”
-
16” from the sidewalk, flowerbed, or driveway and spread as normal. When you have completed this spreading pass,
open the
Side Spread Control
by sliding the control lever from right to left, for a
FULL
spread pattern.
ASSEMBLY INSTRUCTIONS
▪
Make sure #28 Wire Brace is under #15 CONTROL SUPPORT prior to attaching #15 CONTROL SUPPORT.
▪
Attach #15 CONTROL SUPPORT to #11 using #7 Bolts and #16 Nuts
—
DO NOT TIGHTEN.
▪
Using #13 Brace Clip and #7 Bolt and #16 Nut attach #28 Wire Brace to lower side of #15 CONTROL SUPPORT.
▪
Tighten all hardware now
.
3MPH Maximum towing speed
