USTER HVI1000 Скачать руководство пользователя страница 116

Страница: 116 / 238

USTER®

HVI 1000

Instruction Manual

Uster Technologies, Inc.

Chapter 6

(3/08) System

Testing

Page 6-22

These parts are:

•

One (1) Sampler Drum

•

One (1) Color/Trash Tray

•

One (1) Micronaire

Note:

See Part 9 this chapter, for complete details on testing

procedures.

The instructions in this manual have been written using Length/Strength,
Micronaire, and Color/Trash modules. Any module can be used as the
first step in testing. The following test sequence might be used:

1.

Read the

Bale ID

using the bar code reader or enter the Bale ID

via the keyboard.

Length/Strength

- place a cotton sample in the sampler drum.

Press the

L/S S

TART

button; the system automatically forms the

cotton sample beard, the comb slides along the track to the brusher.

After brushing the cotton sample beard is moved into position for
measuring length, uniformity, strength, and elongation.

The system ejects the material remaining in the sampler drums,
returns the combs to the start position, and disposes of the cotton
sample beards

(if L/S Bin Sample Eject was selected in

Configuration/Test Setup).

Color/Trash

— these tests are performed simultaneously.

Place a cotton sample on the color head sample glass.

Press the

C/T S

TART

button.

Micronaire

— because the micronaire value is used to calculate

the length/strength values these values will not be displayed until
the micronaire measurement is complete. If

Manual Mic Entry

checked, click

Enter Mic

and enter the value, or

Содержание HVI1000















































































































































































































































Результаты поиска

Содержание HVI1000

Отзывы:

USTER HVI1000, Инструкция по эксплуатации, Страница: 116 / 238

Результаты поиска

Содержание HVI1000

Отзывы: