USTER HVI1000, Инструкция по эксплуатации

Страница: 108 / 238

USTER®
HVI 1000
Instruction Manual
Uster Technologies, Inc. Chapter 6
(3/08) System Testing
-
Page 6-14
5. Press the L/S Start button
(on the L/S cabinet)
.
6. Press the C/T Start button
(on the Mic cabinet)
.
7. Remove the cotton sample from the balance and place it into the
micronaire chamber. Close the MIC door to measure the
micronaire value for the cotton sample, or if
Manual Mic Entry
is checked, skip this step.
8. As soon as the MIC and Color/Trash tests are finished, remove the
first bale cotton sample from the balance and the Color/Trash Tray
and replace with the second bale cotton sample.
9. Enter the 2 Bale ID number for the second cotton sample.
10. Start the MIC and Color/Trash test for the second cotton sample.
11. Once the Length/Strength test for the first sample is complete, the
results will be displayed.
12. Remove the first cotton sample from the sampler drum and replace
with the second cotton sample.
13. Press the Length/Strength Start button to begin the second test.
14. Repeat steps 9 through 15 for remaining tests (3
rd
, 4
th
, etc.).
As the tests are completed for the cotton sample, the results are
displayed on the screen and transmitted to the host
(if testing online)
.
Data will remain on the screen until testing of the next pair of bales
begins (enter Bale ID for next left cotton sample).
6.2 Retesting
Once data is collected and the summary of data is displayed, a bale
with discrepant data (or data that appears to be incorrect) can be
retested. Initial information from a retested bale will be overwritten when
transmitted to the host, or when it becomes part of the testing report.
Discrepant data includes any combination of side limit or lot limit results.
Side limits are indicated by a
RED background. Lot Limits are indicated
by a BLUE background.
Note:
Discrepant means the bale has had one (1) Lot Limit or Side
Limit result.