Uniflair UST500, Инструкция по эксплуатации

Страница: 96 / 100

CONTROLLO UST500
96 06MC0074@00B0100
14/04/2010
Device operation
Permitted use
This product is used to control centralised air-conditioning units
For safety reasons the instrument must be installed and used in accordance with the instructions supplied. Users must not be able to access
parts with dangerous voltage levels under normal operating conditions. The device must be suitably protected from water and dust according to
the specific application and only be accessible using special tools (except for the front keypad). The device can be fitted to refrigeration
equipment for household and/or similar use. It has been tested and in safety terms, conforms to applicable harmonized European standards. It
has been rated as:
• In terms of design, as a built-in automatic electronic control controller;
• In terms of automatic operating features, as a type 1B and 1Y (TRIAC model) controller;
• In terms of software class and structure, as a Class A controller.
Unintended Use
The use of the unit for applications other than those described above is
forbidden. It should be noted that the relay contacts supplied with the device are functional and therefore may be subject to fault.
Any protection devices required to comply with product requirements or dictated by common sense due for obvious safety reasons should be
installed externally.
Regulations
The product complies with the following European Community Directives:
• Council Directive 2006/95/EC
• Council directive 2004/108/EC
and complies with the following harmonised regulations:
EN 60730-2-6 and EN 60730-2-9
Responsibility and Residual Risks
Uniflair SpA shall not be held liable for any damage incurred as a result of:
•
installation/use other than those intended, and, in particular, failure to comply with the safety instructions specified by applicable regulations
and/or provided in this document;
•
use with equipment which does not provide adequate protection against electric shocks, water and dust under the effective conditions of
installation;
•
use with equipment which permits access to hazardous parts without the use of tools;
•
installation/use with equipment which does not comply with current regulations and legislation.
Non-Liability Clause
This document is exclusive property of Uniflair SpA Controls srl. and cannot be reproduced and circulated unless expressly authorized by
Uniflair SpA Controls srl
Although all possible measures have been taken by Uniflair SpA Controls srl l. to guarantee the accuracy of this document, it does not accept
any responsibility arising out of its use.