Uniflair UST500, Инструкция по эксплуатации

Страница: 90 / 100

CONTROLLO UST500
90 06MC0074@00B0100
14/04/2010
Multi Function Key
When the Multi Function Key is connected to the TTL type serial port, you can rapidly program device parameters (up/download parameter map
to one or more of the same type of devices).
The connection diagram is shown below:
Using the Multi Function Key (folder FnC/CC)
Upload (label UL), download (label dL) and formatting (label Fr) operations should be performed as explained below:
UPLOAD (copy from DEVICE to MULTI
FUNCTION KEY)
By doing this, the programming parameters
will be downloaded from UST 500 to the
Multi Function Key.
DOWNLOAD (copy from MULTI
FUNCTION KEY to DEVICE)
By doing this, the programming parameters
will be uploaded from the Multi Function Key
to the device.
FORMAT*
Formatting the Multi Function Key consists
of deleting the contents of the Multi Function
Key and initializing it.
* This should be done prior to the Upload
when used for the first time.
See 1-4
Upload / Download / Format
The download procedure is illustrated in the
figure.
Press [esc + set] in the main screen.
The label ‘PAr’ will appear. Scroll with ‘UP’ and
‘DOWN’ to find the ‘FnC’ label.
Press ‘set’. The label ‘dEF’ will appear. Scroll with
‘UP’ and ‘DOWN’ to find the ‘CC’ label.
The commands you need to use the Multi Function
Key are in the “CC” folder. Press the ‘set’ key to
access the functions.
Scroll with ‘UP’ and ‘DOWN’ to display the required
function:
•
UL for upload
•
dL for download
•
Fr for format
<IMG INF O>
284, 55
79,9
TTL cable
TTL
Multi Function Key