Uniflair UST500, Инструкция по эксплуатации

Страница: 22 / 100

UST500 CONTROL BOARD
22 06MC0074@00B0100
14/04/2010
set
esc
To get back to the main display, press the esc key or allow a
15 second timeout to elapse for each menu.
View and Reset compressor/pump time
Example display and reset time (hours x10) for
Pump 2
Press the set key from the main display
The label Ai will appear on the display. Use the UP
and DOWN keys to scroll the other labels until you
find the Hr label.
Press the set key to view the first label - which in
this case is the running time for compressor 1
(CP01)
Scroll with the UP and DOWN keys to view (if the
relative resources are present) the running time for
compressor 2 (CP02) the pump running time
(PU01, PU02)/
Press the set key to view the pump running time
PU02.
The tens of hours of functioning are 2.
(Hours expressed in tens:
2 means 20 hours of operation).
To clear pump running time PU02, press and hold
the [set] key.
Note: Repeat the procedure described to reset the
hours of functioning of the other resources.
-------------------------------------
Press the esc key to go back to the main display.