Uniflair UST500, Инструкция по эксплуатации

Страница: 12 / 100

UST500 CONTROL BOARD
12 06MC0074@00B0100
14/04/2010
<IMG INF O>
LED: States and Operating Modes
LED states and Operating
Modes
Icon Colour Colour Permanently
on
Blinking
The display shows the
value/resource set for the “main
display”.
In the event of an alarm, it will
alternate with the alarm code Exx.
(when more than one alarm
occurs at the same time, the one
with the lowest number will be
shown first - see Alarms and
Diagnostics chapter)
Alarm Red Active alarm Alarm acknowledged
Heating
Green
Heating mode
Antifreeze with heat pump
active
Remote heating mode
(Missing
Icon)
Cooling Cooling mode Remote cooling mode
Standby
Local standby
mode
(from
keyboard)
Remote standby
Defrost Defrost active Manual defrost activated
Economy
Configurable
----
See
Parameters
chapter
----
Ui /dS folder
Parameters
UI07 /dS00
Configurable
----
See Parameters chapter
----
Ui /dS folder
Parameters UI07 /dS00
LED: Values and Units of Measure
LED Unit of measure Icon Colour Permanently on Blinking
Values can be displayed with a decimal point by
setting parameter Ui08 see parameters chapter,
Ui folder)
Clock (RTC) Red Shows current time
(24hr format)
Set time
Degrees
centigrade
/ /
Pressure (Bar) / /
Relative
humidity
(% RH)
Not used Not used
Menu (ABC) Menu navigation /
LED: utilities
LED utilities Colour Permanently on Blinking
Amber
Configurable (°)
----
See Parameters
chapter
----
Ui folder
Parameters
UI00..UI07
Configurable (°°)
----
See Parameters
chapter
----
Ui folder
Parameters
UI00..UI07
(°) permanently on: utility active
(°°) blinking:
•
example UI00..UI07= 1 (Compressor 1) indicates:
o
safety timing
o
power limited to 50%
o
block compressor
•
example UI00..UI07= 2 (step 2) indicates: safety timing
<IMG INF O>
122, 45
67,9
0
2
0, 35
6, 3
-1
<IMG INF O>
122, 45
72,95
0
2
-2
5, 75
-1