Uniflair UST500, Инструкция по эксплуатации

Страница: 17 / 100

UST500 CONTROL BOARD
06MC0074@00B0100
14/04/2010
17
‘States’ menu
From the states menu you can view values for each resource.
For some resources, a "dynamic" view is possible.
•
For example, when declared as not present / probe not configured (see System Configuration chapter (folder Par/CF), parameter
CF01=0), analogue input AI2 will not be displayed.
•
For example the hours of functioning of compressor 2 - CP02 – not available on single compressor machines.
Label Visibility Description Change
Ai Ai1 Ai2 Ai3 Ai4 // // Dynamic Analogue inputs //
di di1 di2 di3 di4 di5 // Dynamic Digital inputs //
AO AO1 AO2 AO3 // // // Dynamic Analogue outputs //
dO dO1 dO2 dO3 dO4 dO5 dO6 Dynamic Digital outputs //
CL HOUr dAtE YEAr Clock YES
AL Er00 …. … … … Er99 Dynamic Alarms //
SP Value // // // // // Setpoint (set) YES
Sr Value // // // // // Real setpoint //
Hr CP01 CP02 PU01 PU02 // // Dynamic Running time
(hoursx10)
compressor/pumps
YES
As you will be able to see from the table, the setpoint SP and time can be modified and viewed:
View Inputs/Outputs (Ai, di, AO, dO)
Press the set key from the main display
Example of view for Analogue Inputs The same
procedure applies for all other I/Os. ***
The label Ai will appear on the display.
(Use the UP and DOWN keys to scroll the other
labels until you find the label required)
Press the set key to view the label for the first
analogue input (Ai01in this case)
Press the set key again to view the value in Ai01.
Note that the °C icon lights up to indicate that the
value shown is in degrees centigrade.
***For digital inputs / analogue outputs configured
as digital (DI), the value will be 0/1 (0 indicates Off,
1 indicates On)
-------------------------------------
Press the esc key to go back to the main display.