Uniflair UST500, Инструкция по эксплуатации

Страница: 88 / 100

CONTROLLO UST500
88 06MC0074@00B0100
14/04/2010
Functions (folder FnC)
The Functions menu is used to perform a number of manual functions such as switching on/off the device, acknowledging alarms, deleting the
alarm log, running a manual defrost and using the Multi Function key.
A number of these operations can be done from the keyboard and main display using the keys - see User Interface chapter.
Functions associated to keys can be disabled and password-only access allowed to these functions at a “Service” level only via parameter.
For more details, see the table below:
Label Operation Function activated by
[key] if configured
N.B.:
FnC dEF Manual defrost YES [UP]
tA Alarm acknowledgment YES [UP+DOWN]
St Switch device on/off YES [DOWN]
CC Copy Card Use (multi-function key) NO
EUr Reset alarm log NO
To open the Functions menu (folder Fnc) perform steps 1-4 as indicated below:
1
To view folder FnC in the
main display, press the Esc
and Set keys at the same
time. [esc+set]
2
Pressing both keys will open
the Programming menu:
-------------------
the first folder you will see is
the PAr folder.
3
Scroll with the “Up” and
“DOWN” keys until you find
the FnC folder.
--------------
Press the set key to open the
Functions menu.
4
The first label you will see is
dEF.
-------------------
Scroll using the “up” and
“down” keys to find other
labels/folders. In this order:
•
(dEF)
•
tA
•
St
•
CC
•
EUr