Uniflair UST500, Инструкция по эксплуатации

Страница: 91 / 100

UST500 CONTROL
06MC0074@00B0100
14/04/2010
91
Press the ‘set’ key and the upload (or
download) will be performed. (in the example
dL- download) The string ‘rUn’ will appear on
the display.
If this completes successfully, ‘yes’ is
displayed; otherwise ‘Err’ is displayed
Remove the Copy Card on completion.
Download from reset
Connect the copy card with the instrument switched off.
On switching on, the programming parameters are loaded in the instrument;
lamp test completed…
Example A
…dLY… appears on the display
If the procedure terminates successfully.
Example B
…dLn… appears on the display.
If the procedure does not complete
successfully (°).
In both cases, the device will be switched OFF
locally (OFF appears on the display).
When you press [DOWN] (°°), the device will
operate:
•
With the new map Example A
•
With the previous map Example B
Remove the Copy Card on completion.
(°°) see
•
User Interface chapter, (
folder
Par/UI)
local ON/OFF
section
•
Change On/OFF state (folder St))
section