Uniflair UST500, Инструкция по эксплуатации

Страница: 20 / 100

UST500 CONTROL BOARD
20 06MC0074@00B0100
14/04/2010
Alarm Display (AL)
Press the set key from the main display
The label Ai will appear on the display. Use the UP
and DOWN keys to scroll the other labels until you
find the AL label
Press the set key to view the label of the first active
alarm (if it exists)
In this case, the first alarm is Er01. Use the UP and
DOWN keys to scroll any other alarms.
-------------------------------------
N.B: the menu is not cyclical.
For example, if the active alarms are ER01, Er02
and Er03, the display will show:
Er01 ->Er02->Er03 <-Er02<-Er01
N.B: -> UP, <-DOWN
Press the esc key to go back to the main display.
Example of how to set the setpoint (SP)
By way of example, we will change the setpoint value in COOL mode by 12.0 degrees centigrade to12.5 degrees centigrade.
set
esc
To change the setpoint on your machine, press the set key
from the main display.
set
esc
Pressing the set key once will open a list of the various
folders. Use the “UP” and “DOWN” keys to scroll the menu
and find the SP folder.