Uniflair UST500, Инструкция по эксплуатации

Страница: 15 / 100

UST500 CONTROL BOARD
06MC0074@00B0100
14/04/2010
15
“Main Display” Menu
‘Main Display’ refers to the contents of the default display, i.e. when keys are not used.
In UST500, the main display can be customized to suit personal requirements. The various contents can be selected from the “disp” menu
which is opened by pressing and holding the [set] key for more than 3 seconds. The main display can be selected from:
•
analogue inputs Ai1, Ai2, Ai3, Ai4 (when configured as digital inputs, the display will be defined on the basis of the state and
logical parameter - digital input associations)
•
rtC,
•
Setpoint
o
SetP= set from parameter,
o
Setr= real with any decalibration;
Step by step instructions are provided below.
set
esc
To open the [disp] menu to modify the main
display setup, press and hold the set key for at
least 3 seconds.
[set]
set
esc
Opens the blinking menu for the previous
display (rtC, i.e. current time, in this case).
set
esc
To modify the display, use the “up” and “down”
keys to scroll the menu and press the set key to
confirm.
set
esc
On selection of your preferred display, press the
set key to confirm. You will be automatically
returned to the main display set.