Toshiba Stratagy Flash, Руководство по установке и обслуживанию

Страница: 50 / 260

Installation
Step 13: Program the Applications
2-16
Stratagy I&M 06/02
Exclusive IVP8 Tokens
Tokens available exclusively for the IVP8 are:
•
KM
– Enables a Stratagy Admin PC’s modem to communicate with the IVP8 internal modem
(2400 baud). This token is factory programmed in User ID 993.
Example:
@KM
•
KT ( )
– Directs calls to a designated User ID when DSS function is active (dss_active = true),
the DSS port is assigned in the “answering” mailbox, and the Night Transfer on the DSS
console is On.
Syntax:
KT(XXX)G(YYY)
where:
XXX
Box number used when Night Transfer is On.
YYY
Box number used when Night Transfer is Off.
Night Transfer Alternate Routing
The
KT( )
token is used by the Night Transfer Alternate Routing feature. The feature monitors the
DSS/BLF console’s Night Transfer key in order to activate the
KT( )
token for alternate routing
applications.
IVP8 cannot be programmed to monitor the Night Transfer key when programmed on a telephone
only DSS Console. However, a Night Key can be programmed on both a telephone and DSS
Console.
Program Example
The following is an example on how to program this feature. In this example, we use:
•
User ID: 900
•
User ID when Night Transfer is On: 901
•
User ID when Night Transfer is Off: 990
➤
To program the IVP8 for Night Transfer Alternate Routing
1. Define the Users record to contain:
User ID 900
Extension
@KT(901)G(990)
Do Not Disturb
OFF
Store Messages
NO
DSS Port port number
Note Set this field to the first port of the PDKU card designated for DSS/BLF
console and defined by the console_slot_id parameter. If PDKU is in card slot
11, then DSS Port assignment is 0. Strata CTX/Strata DK assigns the first
port of the slot 64 card as a DSS “host” port.