Toshiba Stratagy Flash, Руководство по установке и обслуживанию

Страница: 69 / 260

Configure Stratagy
Tools Utility
Stratagy I&M 06/02
4-5
Configur
e Stratagy
Telephone System Configuration
CAUTION! Take care when making changes and then restarting Stratagy. In some cases, if
invalid information has been entered, Stratagy may not reboot correctly. (See
“Automatic System Recovery” on page 11-14 for information on files created
during an unsuccessful restart.)
This function modifies the following codes/integration patterns:
•
Telephone System Dial Codes – Stratagy performs certain actions on your telephone system by
using defined telephone system dial codes. To define the dial codes, you must modify the
telephone system dial code parameters.
•
System Integration Patterns – Enables modification to the telephone system integration
patterns.
Note
The telephone system configuration is set using the pbx_type parameter (see “pbx_type”
on page 4-23 for details).
With this option, preset dial codes for other manufacturers’ systems can be enabled or modified. As
an example:
Select a Predefined Dial Code
1. From the Tools menu, press
4
. The Telephone System Configuration screen displays.
2. From the Telephone System
Configuration screen, press
1
.
The Telephone System Dial
Codes screen displays (shown
right).
3. To select a default setting, use
the arrow keys (
↑↓
) and/or
Page Up
and
Page Down
keys to highlight your
selection and press
Enter
...or to cancel without
selecting a dial code, press
Esc
.
Note Select a default dial code only for non-Toshiba telephone systems and only during initial
configuration.
4. After making the selection, press
ESC
. The Telephone System Configuration screen displays.
5. From the Telephone System Configuration screen, press
1
. The changes are transmitted to
Stratagy and Stratagy is shut down and restarted. By shutting down and restarting Stratagy, the
changes take effect.
If your Toshiba telephone system is configured for tone first, you would:
1. Press
1
to Edit System Dial Codes.
2. From the Telephone System Dial Codes screen, delete the suffix –
1
from the line
What to dial
AFTER dialing the User ID extension
.
3. Press
Esc
.
4. Press
2
to save your changes without restarting IVP8.
4079