Toshiba Stratagy Flash, Руководство по установке и обслуживанию

Страница: 161 / 260

Token Programming
Replaced or Variable Tokens
Stratagy I&M 06/02
7-5
T
o
ken Pr
ogramming
%K
Value held in the Calling Party ID buffer.
Syntax %K
%M
Number of messages—replaced with the total number of messages for the current User ID.
Syntax
%M
%N
Number of new messages—replaced with the number of new messages for the current User ID.
Syntax
%N
%P
Previously accessed User ID—replaced with the User ID previously accessed
Syntax
%P
Example
If while accessing User ID 100 a caller enters 222, then while User ID 222 is accessed %P has the
value 100.
%R
Relay page DTMF—replaced with the DTMF digits entered by the caller who invoked RELAY paging
notification. Used mostly for sending a telephone number directly to a User’s pager/beeper from his
User ID.
Syntax
%R
%S0~%S19
Store value—Stratagy has twenty storage tokens (variables) that enable you to input, modify,
retrieve, and output values. Upon each new call, all the variables are initialized to null (no defined
value).
%S0
storage token 0 %S10 storage token 10
%S1 storage token 1 %S11 storage token 11
%S2 storage token 2 %S12 storage token 12
%S3 storage token 3 %S13 storage token 13
%S4 storage token 4 %S14 storage token 14
%S5 storage token 5 %S15 storage token 15
%S6 storage token 6 %S16 storage token 16
%S7 storage token 7 %S17 storage token 17
%S8 storage token 8 %S18 storage token 18
%S9 storage token 9 %S19 storage token 19
Each port has a unique set of twenty %S tokens which do not conflict. Therefore, two different ports
may use the same %S token without disrupting each other’s value.
Syntax
%S0,%S1,%S2,%S3,%S4,%S5,%S6,%S7,%S8,%S9,%S10,%S11,%S12,
%S13,%S14,%S15,%S16,%S17,%S18,%S19
%T
Connect time—replaced with the current connect time, i.e., the total number of seconds that the port/
call has been active.
Syntax
%T
%U
User ID—replaced with the current User ID number.
Syntax
%U
Table 7-2 Replaced Tokens (continued)
Token Description