Toshiba Stratagy Flash, Руководство по установке и обслуживанию

Страница: 86 / 260

Configure Stratagy
System Parameters
4-22
Stratagy I&M 06/02
lcvalid
Delay that must occur after dialing a digit string and before the RDSP driver
considers the loop current drop to be answered. In 10 ms units.
Default: comment line (#set lcvalid 10)
To enable, remove the starting # and set the value.
lcwait
Delay that must occur after loop current drops and before the RDSP driver posts
event 18 to the System Event Queue. In 10 ms units.
Default: comment line (#set lcwait 10)
To enable, remove the starting # and set the value.
login_pound
Stratagy prompts “Finish by pressing the pound sign” when requesting the User ID
or the security code during log on.
If the system is configured with fixed-length User IDs (by changing the values of a
fixed_lenX parameter), users may be confused if they hear this prompt and attempt
to enter a pound sign (
).
True: Stratagy says the prompt.
False: Stratagy does not say the prompt.
Possible values: true, false
Default: true
lognam
System log file name. This log file contains start-up information, any execution error
information, system actions, and shutdown information.
Note It is a good idea to periodically archive or delete this file once or twice a year,
whenever you perform preventive maintenance.
Possible values: valid DOS file name. The single quotes are required.
Default: ‘Stratagy.LOG’
max_dl_inits
Number of simultaneous ports that can go off-hook and dial the telephone system
initialization code. This is necessary because some switches are blocking.
Possible values: 1, 2, ..., number of ports
Default: 2
max_prompt
Number of times a prompt should repeat before hanging up.
Possible values: 1~9
Default: 2
minmsg
Sets the threshold for keeping or discarding messages. A message recording to be
considered valid and kept must be at least as long as this setting. Shorter
recordings are discarded. In 100 ms units.
Default: 10 (1 second)
msg_log
Logs every received message and User ID that checks for messages, along with
the DTMF entered.
Note When active, grows quickly. Archive or delete frequently.
Possible values: valid DOS file name. The single quotes are required.
Default: ‘MSG.LOG’ (To enable, remove the starting # and set the value.)
msg_pending_threshold
Number of seconds that a message must play before it is considered “pending.”
Possible values: 3~10 seconds
Default: 5
Parameter Description