Toshiba Stratagy Flash, Руководство по установке и обслуживанию

Страница: 181 / 260

Customization Examples
Users Menu Examples
Stratagy I&M 06/02
8-5
Customization
Ex
amples
4. For User ID 501 (Back To Original Extension), define the user’s record to contain:
How It Works
The user’s greeting says “... leave a message after the tone, or to page me press 5...” If the caller
presses
, he/she is routed to User ID 5.
User ID 5 does the following:
1. Remembers the previous User ID mailbox and stores the number in
%S0
.
2. Dials #30 to page.
3. Plays the previous User ID mailbox’s name recording.
4. Plays greeting 1.
5. Goes to User ID 500 to perform the supervised transfer.
6. User ID 500 calls the standard station port that acts as a park zone. On a Ring No Answer,
Stratagy flashes the caller back, then goes to User ID 501 via the RNA chain.
7. User ID 501 goes to the User ID stored in
%S0
. This sends the caller back to the original User
ID.
8. Stratagy performs a hookflash and calls the original station again before taking a message.
Second User ID
There is no simple way to directly take a message without calling a second time. In order to do that
a second User ID must be created for each station using this feature.
Each of these new User ID's have:
To make matters more complex, the user needs to record a greeting in both mailboxes. If you do
this, the original User ID stored in
%S0
could be translated to the message mailbox User ID with
the following tokens:
Extension @G(%S0)
@ Suppresses normal process.
G(%S0) Goes to the User ID stored in %S0.
Do Not Disturb On
Store Messages No
Copy Message To <original mailbox>
Extension
@=(%S1,%S0,2,3)G(7%S1)
@ Suppresses normal process.
=(%S1,%S0,2,3) Assigns characters 2~3 of %S0 to %S1. For example, if the User ID is “234”, %S1
equals “34”
G(7%S1) Goes to User ID 734. (Go to the User ID mailbox with the first number of 7 and the value
of %S1 (34) combined.)