Toshiba Stratagy Flash, Руководство по установке и обслуживанию

Страница: 49 / 260

Installation
Step 13: Program the Applications
Stratagy I&M 06/02
2-15
Install
a
ti
on
SMDI Calling Party Identification
The Strata CTX/Strata DK telephone system only provides the Stratagy with incoming Calling
Party ID via SMDI integration. Data messages or packets are sent into the system to provide
information concerning the type of call and the calling party ID.
Note
When configuring the Stratagy for SMDI, make sure both the Stratagy and the telephone
system are configured concurrently. If the phone system is configured for a 10-digit Calling
Party ID, the Stratagy must also have the proper 10-digit integration patterns in the System
Integration Patterns screen (see
“System Integration Patterns” on page 4-9 ). Also make sure
the correct notification template has been selected in the User ID Notify screen.
See “SMDI Serial Integration” on page 4-32 for detailed information on SMDI, caller ID, and
%K
token use.
New User Tutorial Introductory Recording
The New User Tutorial feature plays a introduction prompt prior to beginning the tutorial. Stratagy
comes with a default recording that is saved in the system as a voice file called
‘TUTORIAL.VOX’. This file can be found in the STRATAGY directory on the hard drive.
This prompt can be rerecorded to personalize the introductory recording. For example the
recording could say, “The following is a new user tutorial that will walk you through the set up of
your mailbox... Please see Jane Doe your Installation Coordinator for XYZ Telecom if you have
any questions.”
The default recording can be rerecorded by the use of Token Programming.
Rerecord Tutorial
1. Create a new User ID in the system.
2. In the Extension field enter:
@KR(C:\\STRATAGY\\TUTORIAL.VOX)G(991)
@ stop normal processing
KR record a voice file
( ) file name and location within parentheses
G(991) Go to User ID 991
3. Call into the Stratagy system and dial the newly created mailbox. A beep will be heard to
indicate the start of recording.
4. Record the new TUTORIAL.VOX, finish recording by pressing .
5. To rerecord, redial the mailbox number.
6. To playback the new recording, create an additional User ID with the following Token string in
its Extension field:
@P(X,C:\\STRATAGY\\TUTORIAL.VOX)G(991)
@ stop normal processing
X valid DOS file name
( ) file name and location within parentheses
G(991) Go to User ID 991
7. As with all Token Programming, make sure that the Do Not Disturb feature is Off or the token
program will not run.