Toshiba Stratagy Flash, Руководство по установке и обслуживанию

Страница: 66 / 260

Configure Stratagy
Configuring Stratagy Admin Software
4-2
Stratagy I&M 06/02
Configuring Stratagy Admin Software
Settings for the communication port in Stratagy Admin must match the corresponding parameters
set in the Stratagy System Configuration file on the IVP8.
For example, the Stratagy Admin PC serial port settings made in the Serial Port field of this
procedure must be identical to the serial port definitions (i.e., set serial_port) set in the IVP8’s
System Configuration file (see
“System Configuration” on page 4-13 ).
Note The menu screens detailed in this section are only available with Stratagy Admin version
VSA.2G or later.
➤
To configure Stratagy Admin software
1. From the
C:\VSA3
DOS prompt, type
admin
and press
Enter
. The Stratagy Admin screen
displays.
2. From the Stratagy Admin
Main screen, press
2
or
highlight the Configure
Admin option and press
Enter
. The Admin PC
Configuration screen
displays (shown right).
Note Press
F1
for help with
any settings in the
Stratagy Admin Configuration screen.
3. Make any changes needed. See Table 4-1 for a description of each of the fields.
Note Press
F2
in the Serial Port and Baud Rate fields to display a pop-up box with valid entries.
4. To save your changes, you must have the cursor in the last field (i.e., Modem Init String), and
press
Enter
or the arrow down (
↓
) key
...or to exit without saving your changes, press
Esc
at any time.
The program returns to the Stratagy Admin Main screen.
Table 4-1 Stratagy Admin PC Configuration Fields
Field Description/Default
Advertising
Advertising string that displays when the Main Menu screen blanks after a specified number of
minutes of inactivity (per tmo_blank parameter in the install.cfg file).
Possible values: 60-character string. The single quotes are required.
Default: ‘Stratagy ADMIN’
Log File
System log file name. This log file contains connection information, any execution error information,
and file copy actions.
Note It is a good idea to periodically archive or delete this file once or twice a year, whenever
you perform preventive maintenance.
Possible values: Eight-character file name, plus three-character extension. The single quotes are
required.
Default: ‘Remote.LOG’
3230