Toshiba Stratagy Flash, Руководство по установке и обслуживанию

Страница: 190 / 260

Customization Examples
Notify Menu Examples
8-14
Stratagy I&M 06/02
Notify Menu Examples
The following examples are included in this section:
•
“Message Waiting Light Control When Light On and Off Codes Differ” on page 8-14
•
“Message Waiting Light Control When Light On and Off Codes Are the Same” on page 8-15
•
“Voice Notification” on page 8-16
•
“Notification to a Pager” on page 8-17
•
“Notification to a Pager on Urgent Messages Only” on page 8-18
•
“Relay Paging to a Pager” on page 8-19
•
“Emergency Lists” on page 8-20
Message Waiting Light Control When Light On and Off Codes
Differ
Some telephone systems support message waiting lights that can be controlled by special sequence
keys. The following method works if the telephone system uses different codes to turn on and off
the message waiting light.
Program Example
In the following example:
•
Code for turning on the message waiting light: #63
•
Code for turning off the message waiting light: #64
➤
To program the example
1. For turning on the light, define the Notify record to contain:
2. For turning off the light, define the Notify record to contain:
Title <enter title/comment for identification>
Type NORMAL
Method
W(5,T)#63%E
W(5,T) Wait five seconds for dial tone before sending #63%E.
#63 Turns on the message waiting light. (The code varies depending upon the telephone
system.)
%E Dials the DTMF digits given in the User ID’s Extension field.
Title <enter title/comment for identification>
Type PICKUP
Method
W(5,T)#64%E
W(5,T) Wait five seconds for dial tone before sending #64%E.
#64 Turns off the message waiting light. (The code varies depending upon the telephone
system.)
%E Dials the DTMF digits given in the User ID’s Extension field.