Toshiba Stratagy Flash, Руководство по установке и обслуживанию

Страница: 208 / 260

AMIS Networking
Configuring Stratagy for AMIS
9-4
Stratagy I&M 06/02
Table 9-1 AMIS Parameters
Parameter Description
amis_diskfull Percentage of the flash drive that must be free in order for Stratagy to accept new
AMIS messages. If free space is less than this figure, Stratagy tells the calling AMIS
system that the flash drive is full.
Default: 5 (To enable, remove the starting # and set the value.)
amis_enabled Whether Stratagy processes incoming AMIS calls.
True: Stratagy processes incoming AMIS calls.
False: AMIS calls told that this node is not accepting network calls.
Possible values: true, false
Default: true (To enable, remove the starting # and set the value.)
amis_ltm User ID to use for the AMIS Loopback mailbox. User ID mailbox other AMIS nodes
can use for testing the network. Any AMIS message to this mailbox is sent back to
the sender, if accessible from this Stratagy system.
Possible values: valid User ID. The single quotes are required.
Default: ‘989’ (To enable, remove the starting # and set the value.)
amis_max_attempts Special retry count that keeps track of how many times this system was called
without a successful handshake after answer. If the count is exceeded, then the
gateway is disabled.
Possible values: 1~5
Default: 3 (To enable, remove the starting # and set the value.)
amis_max_node Maximum number of remote nodes (Gateway and Proxy mailboxes) that can be in
the network. If the actual number exceeds this value, some nodes are inaccessible.
Possible values: 1~256
Default: 256 (To enable, remove the starting # and set the value.)
amis_rna Enables the ring no answer time-out to be increased to enable slow answers from
AMIS systems.
Possible values: 1~9
Default: 3 (To enable, remove the starting # and set the value.)
area_code Area code of the resident Stratagy system. Single quotes are required.
Default: ’ ’ (To enable, remove the starting # and set the value.)
country_code Country code of the resident Stratagy system. Single quotes are required.
Default: ‘1’ (North America)
(To enable, remove the starting # and set the value.)
local_amis_node User ID of the Gateway box that represents the local AMIS node. Messages
addressed to this node are delivered directly to the real local box number instead of
being shipped out on the network.
Possible values: valid User ID.
Default: 0 (To enable, remove the starting # and set the value.)
phone_number Local telephone number of the resident Stratagy system. Single quotes are
required.
Default: ‘ ’ (To enable, remove the starting # and set the value.)
unknown_node_action Whether Stratagy accepts messages from unknown AMIS nodes.
1: Refuses to accept messages.
2: Delivers this message even though replies are impossible.
Possible values: 1, 2
Default: 2 (To enable, remove the starting # and set the value.)