Toshiba Stratagy Flash, Руководство по установке и обслуживанию

Страница: 71 / 260

Configure Stratagy
Tools Utility
Stratagy I&M 06/02
4-7
Configur
e Stratagy
# Dial code to return to caller after Ring No Answer:
The code Stratagy dials, during supervised call transfers, to request the telephone switch reconnect the caller to
Stratagy when:
The attempted extension rings
–and–
does not answer within a specified number of rings (configurable per User ID in Users Menu Maximum Rings
field).
Typical value:
F-
(hookflash)
# Dial code to return to caller when there is a Busy:
The code Stratagy dials, during supervised call transfers, to request the telephone switch reconnect the caller to
Stratagy when the extension is busy.
Typical value: F- (hookflash)
# Dial code to use after a call screening reject:
The code Stratagy dials, during supervised call transfers, to reconnect the caller and play the User ID’s current
greeting when:
Call Screening is On
–and–
the extension called rejects the caller.
Typical value:
F-
(hookflash)
# Dial code to connect the caller to the extension:
The code Stratagy dials, during supervised call transfers, to complete the call transfer after:
Detecting an answer at the called extension
–or–
the extension called accepts the call when Call Screening is On.
Typical value:
H
(hang up)
# Number of seconds to wait for dialtone detection:
The longest amount of time Stratagy waits for the telephone system to give Stratagy one second of dial tone.
Setting this value to a number greater than zero enables Stratagy’s dial tone detection.
If your telephone system has a limited number of DTMF receivers or intercom paths for call transfers, there is
always the possibility that one may not be available to Stratagy to perform a call transfer.
Typical value:
4
# Number of 1/100 seconds to use for Flash time:
Time Stratagy must remain on-hook while performing a hookflash.
Typical value:
55
(just over one-half second)
# Which DTMF tone to listen to for answer detection:
Some telephone systems play a specific DTMF tone during a call transfer when the called extension answers. This
provides faster answer detection and call processing. If your telephone system supports this feature, enter the
DTMF tone.
Typical value:
a
Table 4-2 Telephone System Dial Codes - Definitions and Settings (continued)
Parameter/Description