Toshiba Stratagy Flash, Руководство по установке и обслуживанию

Страница: 166 / 260

Token Programming
Defined Tokens
7-10
Stratagy I&M 06/02
KL( )
Logs caller into User ID.
Note Cannot be used in the Notify Menu.
Syntax
KL(uid)
where:
uid Valid User ID.
Example
KL(239)
Logs the caller into User ID 239
KM
Enables a Stratagy Admin PC’s modem to communicate with the IVP8 internal modem (2400). This
token is factory programmed in User ID 993.
Example
@KM
KN( )
Access AMIS networking—the KN( ) token enables access to AMIS networking (see Chapter 9 –
AMIS Networking ).
Syntax
KN(phone[,mbx])
where:
phone DTMF digits representing the telephone number to dial to connect to the AMIS network.
mbx Valid mailbox on remote system or current User ID (Proxy Box). If not defined, Stratagy
uses value defined when AMIS message was addressed via the Gateway Box. See
Chapter 9 – AMIS Networking for details.
Example
KN(9-1-7145555555,345)
9 Dials for an outside line.
- Pauses (0.5 second).
1 Dials 1 for long distance access.
- Pauses (0.5 second).
7145555555 Dials the telephone number.
345 Dials the User ID.
KR( )
Creates a recording—if the destination is an existing User ID, Stratagy inserts the recording into that
mailbox as a new message. Otherwise, the destination is assumed to be the name of an existing file
and the recording is placed there.
Syntax
KR(dest)
where:
dest Destination—User ID or file (valid DOS file name). Can be a variable.
Example
KR(532)
Inserts the recording in User ID 532 as a new message.
Table 7-3 Defined Tokens (continued)
Token Description