Toshiba Stratagy Flash, Руководство по установке и обслуживанию

Страница: 54 / 260

Access and Use Stratagy
Access Stratagy
3-2
Stratagy I&M 06/02
Access Stratagy
There are two ways to access the Stratagy system: local and remote:
Local Access
Local access refers to accessing the Stratagy system via a cable connecting the Stratagy system with
a portable or desktop PC. To perform local access, you must connect the local system to the Stratagy
system each time you access Stratagy locally (see
Chapter 2 – Installation for details).
Before You Start
It is recommended that you:
•
Back up your database prior to starting this procedure. (See Chapter 11 – Maintenance,
Upgrades and Troubleshooting for instructions.)
•
Make a backup copy of the installation disks and store them in a safe place.
•
Verify that Stratagy is operational by making a test call into the system.
Note
Menu screens detailed in this section are available only in Stratagy Admin version VSA.2G
or later; however, only VSA.3x can be used with the Flash.
Access Stratagy Locally
1. From the DOS prompt (
C:\VSA3
for Flash and
C:\VSA3
for IVP8), type:
admin
and press
Enter
. The Stratagy Admin screen displays.
Important!
The Stratagy Admin PC must be configured for the correct serial port in Stratagy
Admin prior to performing
Step 2 .
2. Press
Enter
.The Stratagy Admin software prompts for the Stratagy’s system password.
3. Type the password (the default is
Stratagy
) and press
Enter
.
If a modem is not detected, Stratagy Admin establishes a direct connection (local access).
Method Description Requirements
Local Access Stratagy via a cable connecting
the Stratagy system with a portable or
desktop PC.
•
Customer-supplied portable/desktop PC
•
Stratagy Admin software
•
Customer-supplied Stratagy Admin Cable
(SG-ADMCBL)
Remote Access Stratagy via a modem from a
PC located at this or another site.
•
Stratagy Admin software
•
Customer-supplied modem for Flash
Note IVP8 has an internal modem.