Toshiba Stratagy Flash, Руководство по установке и обслуживанию

Страница: 60 / 260

Access and Use Stratagy
Main Menu Options
3-8
Stratagy I&M 06/02
Notes
•
This option is not available when accessing Stratagy remotely.
•
The Stratagy is completely shut down when the status light is Out and all port LEDs are
On.
•
IVP8 – This is the only option on the Shutdown menu that parks the head.
3. From the Shutdown Menu, highlight your selection and press
Enter
.
4. If you chose the “Shutdown and STOP for power off” option, Stratagy asks you to confirm the
shutdown. Type
Y
to confirm. The DOS prompt (
C:\VSA3
) displays.
➤
To restart/reset the IVP8 system after selecting “Shutdown and STOP for power off” option
Note If you select any of the first five options on the Shutdown Menu, Stratagy automatically
restarts.
1. Holding the Stratagy by the edges or the strap, gently pull the card part way out of the slot. The
card needs only to be pulled out so that the connectors do not meet.
2. Wait a few seconds and then gently push the card back into place. Apply firm, even pressure to
ensure proper mating of the connectors. This automatically restarts the system and puts all
channels on-hook and ready to accept calls.
➤
To restart/reset the Flash system after selecting “Shutdown and STOP for power off”
Note If you select any of the first five options on the Shutdown Menu, Flash automatically
restarts.
➤
Unplug the Flash’s power cord from the wall, wait a few seconds and then plug it back in. This
automatically restarts the system and puts all channels on-hook and ready to accept calls.
Main Menu Options
From the Main Menu (see Figure 3-2 on page 3-10 ), you can access the following options:
•
Users (
Alt+U
): accesses the Users Menu (customizing User ID mailboxes). See Chapter 6 –
Menus for information on using the Users Menu screens.
•
Reports (
Alt+R
): generates reports. See “Run Report” on page 10-5 for more information.
•
Shutdown (
Alt+S
): shuts down the system. See “System Shutdown” on page 3-6 in this
chapter.
•
Tools (
Alt+T
): uses the Filecopy Utility. See “Filecopy” on page 11-9 in this chapter.
•
Date/Time: sets system date and time. See “Change System Date and Time” on page 3-9 in this
chapter.
➤
To access the options
1. Press
Alt+
the first character of the option (e.g.,
Alt+U
for the Users Menu).
2. Type the password. (The default password is
Stratagy
, with the first letter uppercase.)