Toshiba Stratagy Flash, Руководство по установке и обслуживанию

Страница: 158 / 260

Token Programming
Singular Tokens
7-2
Stratagy I&M 06/02
Singular Tokens
Singular Tokens are single character commands that perform a single action that cannot be
modified. For example, the token
1
performs the action of playing DTMF 1.
Table 7-1 Singular Tokens
Token Syntax Description
@
@
Suppress normal process—prevents Stratagy from normally processing an Extension
or Method field.
•
Normally when Stratagy evaluates an Extension field, it plays the “Please hold...”
prompt to the caller, puts the caller on transfer hold, and then evaluates the
tokens in the field. If the first character in the field is the @ token, however,
Stratagy immediately begins processing the next token without performing the
transfer procedure.
•
In the case of the Method field, Stratagy does not attempt to access a port for an
outbound notification call.
1 1
Plays DTMF tone 1.
2 2
Plays DTMF tone 2.
3 3
Plays DTMF tone 3.
4 4
Plays DTMF tone 4.
5 5
Plays DTMF tone 5.
6 6
Plays DTMF tone 6.
7 7
Plays DTMF tone 7.
8 8
Plays DTMF tone 8.
9 9
Plays DTMF tone 9.
0 0
Plays DTMF tone 0.
* *
Plays DTMF tone *.
# #
Plays DTMF tone #.
A A
Plays DTMF tone A.
B B
Plays DTMF tone B.
C C
Plays DTMF tone C.
D D
Plays DTMF tone D.
- (dash) -
Short pause—pauses 0.5 (one-half) second.
, (comma) ,
Long pause—pauses two seconds.
~ ~
Timed break recall—pulse dials the digit 1 to effect a timed break recall.
E
E
Earth recall—performs an earth recall. This is used in place of the hookflash (the F
token) on some switches.
F
F
Hookflash—performs a hookflash. The length of the hookflash specified under the
Telephone System Dial Codes option # Number of 1/100 seconds to use for flash time.
(See
Chapter 4 – Configure Stratagy .)