Toshiba Stratagy Flash, Руководство по установке и обслуживанию

Страница: 195 / 260

Customization Examples
Notify Menu Examples
Stratagy I&M 06/02
8-19
Customization
Ex
amples
Relay Paging to a Pager
With relay paging, the caller enters his/her number on the telephone dial pad and Stratagy notifies
the user by relaying the caller’s telephone number to the user’s pager display. A caller can page
without redialing, or even knowing, the user’s pager number.
Program Example
In the following example:
•
Dial 9 for an outside line
•
The paging system uses the * to designate a “-” in the pager display
•
User ID: 2765
•
Caller’s telephone number: 583-3700
•
To activate relay paging, the caller presses # when the User ID’s greeting plays
➤
To program the example
Define the Notify record to contain:
How It Works
Per the notification schedule, Stratagy:
1. Dials the user’s digital pager’s telephone number.
2. When the pager answers:
•
Relays the User ID.
•
Relays the caller’s telephone number.
For this example, the following displays on the pager: 2765-5833700.
Title <enter title/comment for identification>
Type RELAY
Variable <digital pager’s telephone number>
Method
9W(4,T)%V,,W(2,P)-%U*%R#-
9 Dials 9 for an outside line.
W(4,T) Waits up to 4 seconds to hear dial tone.
%V Dials the contents of the Notify record’s Variable field. This should be the digital pager’s
telephone number.
,, Pauses 4 seconds (2 seconds x 2).
W(2,P) Waits up to 2 rings for the pager/beeper to answer.
- Pauses 0.5 second to enable the pager’s answer confirmation tones.
%U Relays the User ID.
* Dials *. (Used by many paging systems to designate a “-” in the pager display.)
%R Relays the DTMF digits entered by the caller. This should be the caller’s telephone
number.
# Dials # to end call.
- Pauses 0.5 second.