Toshiba Stratagy Flash, Руководство по установке и обслуживанию

Страница: 91 / 260

Configure Stratagy
System Parameters
Stratagy I&M 06/02
4-27
Configur
e Stratagy
tmo_idle
When this value is greater than 0, it enables a special function in Stratagy to go
off-hook and back on-hook whenever a port is idle for the specified number of
seconds. This is necessary only when under rare circumstances a telephone switch
may not release a station that is connected to Stratagy even after Stratagy has
gone on-hook.
Possible values: 0 (disabled), any number (seconds)
Default: 0
tmo_menu
Amount of time Stratagy waits before repeating a choice menu.
Possible values: 1~99 (units of 100 ms)
Default: 20 (2 seconds)
tmo_pickup
Minimum amount of time the system waits between an on-hook and off-hook event.
Possible values: 10~99 (units of 100 ms)
Default: 20 (2 seconds)
tmo_resume
Number of seconds Stratagy pauses while playing or recording a message. If this
period elapses and the user does not tell Stratagy to resume, Stratagy
automatically continues to play messages (during playback) or cancels the
recording (during recording).
Possible values: 0~ 255 (seconds)
Default: 30 (seconds)
tmo_silence
Maximum amount of silence time the system waits before deciding to finish a
recording and hang up.
Possible values: 3~15 (seconds)
Default: 15 (IVP8 = 5)
tmo_sound
Maximum amount of sound/dial tone time the system waits before deciding to finish
a recording and hang up.
Possible values: 0~9 (seconds)
Default: 0 (IVP8 = 5)
trace_cap
Defines the size of the TRACE.OUT file in kilobytes. When the size of the file
reaches its defined maximum, new data begins to overwrite the oldest data in the
file, generating a continuous loop of information.
Possible values: Values vary depending on the amount of Trace information
required and the space available on IVP8’s flash drive. If this
value is set high, it could take an excessive amount of time to
copy the file to the portable/desktop computer. A standard
setting is 1440 for copying the file to the portable/desktop
computer’s floppy-disk drive.
Default: 1000 (kilobytes = 1 megabyte)
use_pvc
Whether Stratagy enables the voice board driver’s Positive Voice Control feature
when dialing and expecting a voice to answer.
True: Driver’s Positive Voice Control feature enabled.
False: Driver’s Positive Voice Control feature not enabled. On some switches,
setting this value to false avoids false answer detects.
Possible values: true, false
Default: true
Parameter Description