Toshiba Stratagy Flash, Руководство по установке и обслуживанию

Страница: 79 / 260

Configure Stratagy
System Parameters
Stratagy I&M 06/02
4-15
Configur
e Stratagy
area_office
When SMDI is being used on a Centrex switch, the value set in this parameter
identifies which calls are from voice mail subscribers by specifying the first few
digits (e.g., area and office codes) that are shared by all subscribers.
Example: In this example, the area_office parameter is set to ‘714583’.
When a call arrives from any telephone number with the first digits of “714583,” the
SMDI subsystem processes it as a subscriber call. If a call arrives and the switch
tells Stratagy that the first six digits are not “714583,” the SMDI subsystem treats
the caller as external. Note that the value of area_office does not need to be only
six digits long. If subscribers share the first five digits of their telephone numbers,
then just those five digits should be stored in this field.
Possible values: up to 10 numeric digits, any combination
Default: (no default) (To enable, remove the starting # and set the value.)
auto_report
Report definition file, (created using Stratagy’s Main Menu’s Reports option.
Generates a report automatically at the time specified by auto_report_time.
Example: ‘daily.rpt’
Possible values: valid DOS file name. The single quotes are required.
Default: (no report name)
auto_report_time
Time of day the automatic report generates using the file specified in auto_report.
The value is in 24-hour format with the colon (:) omitted.
Example: 1:30 a.m. is 0130
2:15 p.m. is 1415
Possible values: 0 (does not generate the auto_report), 0001~2400
Default: 0
begin_rec_prompt
Whether the system says “Begin recording at the tone, ... or hang up” before taking
a message. This also affects the “to re-record press 2” and “to append press 3”
menu selections given after a recording.
True: The system plays the above prompt.
False: The caller only hears a tone.
Possible values: true, false
Default: true
box_idx
Sets the Directory User ID for all ports or for specified ports. The Directory is a
special mode that enables Stratagy to search its User IDs for a match on the
Directory Name fields. For more information about the Directory, see Chapter 9 –
Special Greeting User ID Mailboxes.
Example: Define this parameter as box_idx 411 1 to set User ID 411 as the
directory search ID for port 1. If no port is defined, then 411 is enabled
for all ports.
Note Stratagy builds an index file based on information given in the Directory
Name fields. It enables you to use one or more letters to perform the search,
matching all entries possible. For every User ID that matches, Stratagy plays
the name recording—which really may play any recording you want, if
available.
Possible values: valid User ID and valid port
Default: 411 – enabled for all ports.
Parameter Description