Toshiba Stratagy Flash, Руководство по установке и обслуживанию

Страница: 207 / 260

AMIS Networking
System Identification Number
Stratagy I&M 06/02
9-3
AMIS Networking
System Identification Number
The System Identification Number consists of a country code (the digit “1” in North America), area
code, and seven-digit phone number. This number not only identifies the calling system, but can
also be used by the administrator to configure the local system to enable message replies.
Configuring Stratagy for AMIS
There are three steps to configuring Stratagy to act as an AMIS node:
1. Set the Stratagy AMIS system parameters.
2. Create Gateway mailboxes for each remote system with which Stratagy communicates.
3. Create Proxy mailboxes for each remote user that wishes to have a local mailbox.
Step 1: Set AMIS Parameters
For AMIS to operate correctly, you must activate the AMIS configuration parameters in the
Stratagy system and modify their settings.
Table 9-1 lists the required parameters and their correct
settings.
1. From the Stratagy Configuration Utility screen, press
2
...or use the arrow keys (
↑↓
) to highlight Stratagy System Configuration and press
Enter
.
The Stratagy System
Configuration Screen is split into
two areas: the left screen area lists
the actual parameters and their
values, the right screen area lists
context-sensitive help for each
parameter. See
Table 9-1 for a list
of the parameters, their
definitions and default settings.
2. Using the arrow (
↑↓
) or
Page
Up
and
Page Down
keys scroll
to the AMIS configuration
parameter section.
3. Modify the parameter using the line editor at the top of the screen. For each parameter listed in
Table 9-1 , remove the starting
#
. Then set appropriately.
4. Press
Enter
to save your changes
...or
Esc
to exit without saving changes.
5. Press
Esc
. The Stratagy Configuration Utility screen displays.
Note We recommend that you back up the current database at this time by selecting the Stratagy
Backup Utility. See
“Backup Utility” on page 11-3 .
6. Press
Esc
again. Stratagy reboots and returns to the Main Menu for call processing or Stratagy
programming.
4073