TI Navigator, Справочное руководство

Страница: 80 / 314

74 Running interactive activities
c) Select the
Plot on device
check box.
Note: Selecting this option makes the plot available for
viewing on your students’ calculators.
d) If you want to configure another plot, repeat steps b - c.
e) Click
OK
.
Note:
If you do not configure the plot here, then your students
cannot view the plot on their calculators.
8. Select or clear the
Let students resubmit lists
check box.
Note:
If you choose this option, students can change and resend
their lists.
9. Select the lists containing the source data with which you want your
students to start.
10. Click
OK
.
Note:
If you want your students to have specific graph window settings,
you should also set up the graph window settings before you start the
activity. When you start the activity, the Activity Center tool sends the
graph window settings to your students’ calculators. (See “Changing the
graph window settings” on page 82.)
To configure list options for independent lists
1. If you have an activity running, stop it. (See “Stopping an activity”
on page 96.)
2. In the Contribute drop-down list, select
Lists
.
3. Click Configure .
The Configure Calculators for Activity dialog box opens.
Notes:
• If you do not have any lists in the Activity Center tool, the Create
New Lists dialog box opens. This lets you define the names of
the lists that store the data collected from your students. You
must define the names of the lists to establish where the Activity
Center tool stores the data collected from your students. (See
“Creating lists” on page 97.)
• The contents of the Configure Calculators for Activity dialog box
vary depending on which main settings you select (Choose from
Data Sets or Choose from independent lists).