THOMSON Grass Valley Kalypso Classic, Справочное руководство

Страница: 179 / 404

Kalypso Reference Manual 179
Daily Setups Menus
neering source by eye. Touching the soft knob label data pad brings up a
numeric keypad that can be used to select an Engineering source by its
Engineering ID number.
Engineering source selection is also possible using a source picker.
Touching an Engineering Source data pad in the Logical source selection
pane brings up a scrolling Engineering source picker (
Figure 112 ).
Figure 112. Source Patch Engineering Source Picker
Touching an Engineering source button associates that source to the cur-
rently selected Logical source. You can also select
No Source
, in which case
the system substitutes black whenever that Logical source is selected.
It is possible to associate the same Engineering source to many different
Logical sources. In this case selecting either Logical source on a panel
selects the same Engineering source.
Internal sources (M/E outputs, Still Store outputs, etc.) can be named in the
Source Patch menu but can not be remapped. This permits defining custom
names to avoid confusion between internal Kalypso source names and pre-
existing external source names already used in a facility.