THOMSON Grass Valley Kalypso Classic, Справочное руководство

Страница: 120 / 404

120 Kalypso Reference Manual
Section 2 — Control Panels
When source memory is on, six separate actions can be performed with the
Clear Wk Bfr
button.
• Pressing Clear Wk Bfr once clears all the work buffers parameters except
those associated with source memory in all levels enabled in the Master
E-MEM subpanel.
• Pressing
Clear Wk Bfr
twice rapidly clears all the work buffer parameters
for all the enabled levels, and also clears the source memories of the
sources currently selected in the enabled levels.
• Pressing
Clear Wk Bfr
once while holding down at least one source select
button clears only the source memory related parameters for each held
down source. The Master E-MEM enables have no bearing on this oper-
ation.
• Pressing
Clear Wk Bfr
twice rapidly while holding down at least one
source select button clears the source memory related parameters and
all the work buffer parameters for the level of the source button held
down. The Master E-MEM enables have no bearing on this operation.
• Pressing Clear Wk Bfr once while holding down at least one of the M/E Key
delegation buttons next to the M/E status display clears all the work
buffers parameters except those associated with source memory for
each held down keyer. The Master E-MEM enables have no bearing on
this operation.
• Double pressing
Clear Wk Bfr
while holding down at least one of the
M/E Key
delegation buttons clears all the work buffer parameters
(including those for source memory) for each held down keyer. The
Master E-MEM enables have no bearing on this operation.
When source memory is off, the separate source memory area and the
Source Memory Default values are not used. In this situation, source
memory related parameters cleared with the
Clear WkBfr
button will be
replaced with Default Keyframe parameters.
Restore Work Buffer Button
Rest WrkBfr
– Restores the work buffer to its original keyframe values or
interpolated state. For example, if you recall an effect and make changes to
its settings in the work buffer, pressing
Rest WrkBfr
removes the changes that
were made and restores the original values.
Rest WrkBfr
is useful if during
effect editing you accidentally change the wrong parameter.
Timeline Navigation Button Group
Prev KF
– Moves the cursor to the previous master timeline keyframe.
Next KF
– Moves the cursor to the next master timeline keyframe.
Begin
– Moves the cursor to the first keyframe of the effect.